“We go back a long way with Topcon technology, lasers and integrated systems with rotating lasers,” said Peter Stadelbauer, Owner, ACI Excavations. “You have to be one step ahead of the opposition, if you’re not, you run last.”
ACI Excavations has a long-standing relationship with Aptella and Topcon technology that goes back more than 30 years When the Topcon X-53x auto excavator was released Mr Stadelbauer was eager to install the technology on his newest excavator.
“Most people in my industry understand that getting qualified, confident operators is very hard these days. We put three different operators in the machine to test the new system, and all these guys are competent – I just wanted to find out what their thoughts were,” said Mr Stadelbauer.
“One who I would class as a top tier operator, he didn’t mind it and was sort of non-plussed about it. The two other guys loved it: one was putting topsoil on a batter with the blade and he said that it picked up productivity by 20% and he didn’t have to worry about re-checking his work, he could see that it was uniform.”
Mr Stadelbauer has found the Topcon X-53x auto excavator system from Aptella and the 220x series excavator from JCB CEA work together seamlessly. One of the features of the X-53x auto excavator system that stood out to Mr Stadelbauer is the joysticks.
“You have to change the joysticks from the joysticks supplied by the machine manufacturer. They’re removed and Topcon put their own joysticks on. Which makes it so much easier because there’s probably three functions that the operator doesn’t have to take his hands off the joysticks to change settings on the touch screen, where he can actually do it off the joystick. He can [check?] his elevation and other things like that,” said Mr Stadelbauer.
Mr Deon Cope, National Product Manager, JCB CEA has known Mr Stadelbauer for many years and noted that he was not only an early adopter of the auto excavator technology but also was one of the first to run Topcon GPS and runs this technology on all his JCB CEA machines.
“Peter was the first to order the new 220x next generation machine from JCB, this excavator has significant change from the previous JS model, there’s been significant improvement and changes to the machine and the hydraulics of the engine,” said Mr Cope.
Mr Cope also noted that the 220x series excavator and X-53x auto excavator system worked as seamlessly together as the teams at Aptella and JCB CEA when it came to setting up the machine for ACI Excavations.
“We’re big believers of layering 2D and 3D machine control systems on local machines, rather than factory fitted systems,” Mr Cope said. “We’re the experts in the machines and Aptella is the expert in these systems and it makes sense to lean on that support.”.
“Peter came to us and said he wanted to implement the auto excavator system and we’d never seen the system before, so we gave JCB in Europe a call and they said that this Topcon system had been successful on our machines in Europe so we worked with the Aptella team to make it happen!”
“I’d always advise customers to engage with people who know the product – engage with your local machine provider and your local technology and system provider, have those group conversations about what you want, when you need it and how you want it installed,” added Mr Cope.
Since implementing the Topcon X-53x auto excavator system, the team at ACI Excavations has seen an increase in productivity and a decrease in fuel consumption. Mr Stadelbauer also notes that the X-53x auto excavator makes it easier when selecting staff.
“We’re getting good readings back on our fuel economy. The machine’s not working as hard, because the operator usually would be jerking the levers, but with the automated system installed he isn’t, it’s sort of flowing through smoothly,” said Mr Stadelbauer.
“It also makes it easier when you’re selecting staff, because as long as they’ve got some GPS experience they’ll understand the system and away you go. You can flick it into and out of auto with just a push of a button: to put it in you push two buttons and to take it out you push one. You don’t even look at the screen, it’s just done with your fingers.”
Topcon’s X-53x auto excavator system has made excavating on site much more accurate and efficient for ACI Excavations’ team. The ability to put in the design file and let the auto excavator run through the application has reduced the need for re-working and saves a lot of time while reducing operator fatigue.
“Previously you’d have to set the file up for your project, start digging and go through the normal process of using a GPS 3D system, whereas especially with the top soiling and batters and ponds we just put in the file, put the 3m blade on and it’s just a no brainer, you just set it at whatever level you want and away you go,” said Mr Stadelbauer.
“Because you’ve got the ease of only one lever operation, it does basically all three functions with one lever, your right hand you can just stick it in your pocket if you want, it’s not needed.”
The importance of service and support
Having a local Aptella team important is hugely important to Mr Stadelbauer. He regularly relies on the team for back up support and has found other equivalent systems don’t have that same support available.
Utilising Aptella’ Tokara service, which provides remote access and support for machine systems and survey rovers, ACI Excavations is able to save time and maintain high productivity levels on site.
“It all comes down to dollars and cents and if your machine’s parked up because you’ve got a problem you’re losing money,” he said. ”Because of the Tokara system we can ring tech support, who can remotely access the system to resolve any issues quickly,” said Mr Stadelbauer.
“With this machine it had a problem with the elevation on the switches. Often the operators play too much with the internals and they’re not supposed to, and the guy at Aptella support spoke my operator through the process of getting it back up to where it should be.”
Remote troubleshooting is the Tokara Link feature that Mr Stadelbauer would peg as the most important for his team on site, with a close second going to the ability for surveyors to upload files to the machine while it is working.
“They don’t have to stop the machine, they just remote in, upgrade the file, delete the file it’s on and the operator just keeps on tracking, there’s no delay. There’s no downtime,” said Mr Stadelbauer.
“The 3D system that we’re using on all the other machines is still quite okay, there’s nothing wrong there, but that’s basically the old horse and this is the new horse and he’s a thoroughbred.”
About ACI Excavations
ACI Excavations has been in operation since 1998 and specialises in bulk earthworks, mainly wetlands and general plant hire.
We source, deploy and support intelligent positioning solutions to enhance our customers’ productivity.
Aptella Pty Ltd
ABN 56 130 367 065
